This includes all the parts necessary to install a new set of
completely finished floorboards for your Baron 55-Series. These
boards are CNC cut to match the original factory Beechcraft
boards. Made from high quality 5ply, 1/4" Baltic Birch.
It includes all 8 finished floorboard pieces, pre-drilled for screws,
mounting hardware and pre-applied sound deadening material to the
backsides of the boards.
All hardware is riveted in place
(Tinnermans) and includes new screws and all new U clip nuts for the
airframe. If you ship your pilot side floor plate and hand crank base
plate they will be powder coated and returned to you with your finished
floorboards.
$1,295 Includes Free US Ground Shipping
*The floorboards are sanded with 400, 800,
and 1000 grit sandpaper before
receiving a high gloss polyurethane coating and a final high-gloss
polish with Carnauba wax. Requires you to send your old boards to
A&M for exact duplication.
Baron 55-Series Floorboards Shown Below